Right side is done

Removed the door first thing!

Removed the door first thing!

There wont be a lot of writing here I don’t think. I got the right quarter panel in primer yesterday and the rest of the right side in primer today. This is just the first coat so I’ve used a guide coat then I will block sand it and apply the final coat of primer before it goes to the painter.



001 004 008 011The flat area of the door was the most work. The rest, like the reveals around the windows and door jams, was just detail work. – Not very phyically taxing but time consuming.

Day's end!

Day’s end!


It may not seem like I got much done for the time I put in my log book but I can’t take pictures of everything. I drove some nails into the door jam and had to spot weld a couple places on the roof panel above the door too; then there was the right side of the cowl section where I patched the rust. I wrote and article on that whole process a few weeks ago. If anyone would like to have a specific article written, please let me know. I know several people in the business and might be able to accommodate you. Thanks for reading -Kevin







Leave A Comment...